TS8852 Requesting Deployment
- tietech
- Blizzard Force Deployed
- Posts: 35
- Joined: Mon Dec 07, 2009 7:06 pm
- Name: Stephane
- TKID: 8852
- Garrison: Capital City Garrison
- Location: Kanata, Ontario
TS8852 Requesting Deployment
I've just had my snowy approved by the Canadian Garrison and requesting Blizzard Force Deployment please.
Positive criticism would also be greatly appreciated.
Thanks
Positive criticism would also be greatly appreciated.
Thanks
First Canadian Snow Scout
Stephane Bordeleau
TS-TI 8852
Keep on Troopin`
Good start but it looks like you are still missing a few things. You need the button for the ab plate. You're missing a paint detail around the right side bumps. Let's see some pics of the backpack and canister too.
Ian Lindsay............Former Blizzard Force Detachment Leader.........Golden Gate Garrison........TS/BH/RC-7197
-
- Blizzard Force Deployed
- Posts: 1126
- Joined: Sat Apr 08, 2006 8:42 pm
- Location: Norristown, Pennsylvania
- Contact:
Along with what Ian's said, you also mis-cut your eyes too large. You're going to need to either resculpt the detail back on or replace the face plate entirely.
See a build up of my TS armor here: http://www.bloody-plastic.com/costumes.html
- Jack Doud
- TK/TS 2249
- Blizzard Force Historian
- Jack Doud
- TK/TS 2249
- Blizzard Force Historian
- tietech
- Blizzard Force Deployed
- Posts: 35
- Joined: Mon Dec 07, 2009 7:06 pm
- Name: Stephane
- TKID: 8852
- Garrison: Capital City Garrison
- Location: Kanata, Ontario
Here are the new mods
Painted bump on chest armor.
Plastic and bondo and paint to shrink the eyes.
Button for the ab plate, one layer added, in the orginal pic the 3 dot were there.
Let me know if i am ready for Blizzard Force Deployment.
Ian and Jack, thanks for the feedback this is greatly appreciated.
Front
Back
Painted bump on chest armor.
Plastic and bondo and paint to shrink the eyes.
Button for the ab plate, one layer added, in the orginal pic the 3 dot were there.
Let me know if i am ready for Blizzard Force Deployment.
Ian and Jack, thanks for the feedback this is greatly appreciated.
Front
Back
First Canadian Snow Scout
Stephane Bordeleau
TS-TI 8852
Keep on Troopin`
-
- Blizzard Force Deployed
- Posts: 76
- Joined: Mon Dec 22, 2008 10:39 pm
- Name: Meat Popsicle
- TKID: 3346
- Garrison: Carolina
- Location: High point, nc
- Banzai88
- Blizzard Force Deployed
- Posts: 995
- Joined: Sat Feb 02, 2008 3:10 am
- Name: Banzai88
- TKID: 1588
- Garrison: Imperial Sands Garrison
- Location: So Cal
- Contact:
Yes--you fixed the eye openings well. Your ab plate belt looks a bit thick; is it 3 inches tall? Should be 2" like this:
http://s157.photobucket.com/albums/t54/ ... bFar00.jpg
http://s157.photobucket.com/albums/t54/ ... bFar00.jpg
-
- Blizzard Force Deployed
- Posts: 1126
- Joined: Sat Apr 08, 2006 8:42 pm
- Location: Norristown, Pennsylvania
- Contact:
Looking much better.
The only thing I can see now that will keep you from deployment is your missing the wrist covers. These are easy enough to make out of some scrap ABS and a heat gun.
The only thing I can see now that will keep you from deployment is your missing the wrist covers. These are easy enough to make out of some scrap ABS and a heat gun.
See a build up of my TS armor here: http://www.bloody-plastic.com/costumes.html
- Jack Doud
- TK/TS 2249
- Blizzard Force Historian
- Jack Doud
- TK/TS 2249
- Blizzard Force Historian
- tietech
- Blizzard Force Deployed
- Posts: 35
- Joined: Mon Dec 07, 2009 7:06 pm
- Name: Stephane
- TKID: 8852
- Garrison: Capital City Garrison
- Location: Kanata, Ontario
here are the arms
I did not suit up for this...here are my arms.
hope I make BF deployment!!!!
hope I make BF deployment!!!!
First Canadian Snow Scout
Stephane Bordeleau
TS-TI 8852
Keep on Troopin`
-
- Posts: 71
- Joined: Sun Feb 22, 2009 1:09 am
- Name: Meat Popsicle
- TKID: 8918
- Location: Sunny HOT Arizona USA